[Amps] plate choke bypass caps

Amps

[Amps] plate choke bypass caps

To:	<amps@contesting.com>
Subject:	[Amps] plate choke bypass caps
From:	"kenw2dtc" <kenw2dtc@comcast.net>
Date:	Wed, 24 Jan 2007 05:58:35 -0500
List-post:	<mailto:amps@contesting.com>

I'm building a 160 meter linear.  I plan on using two 90 uhy chokes in 
series and at right angles to one another.  Do I put the bypass cap just at 
the B+ point or should I also bypass in the center of the two chokes?

73,
Ken W2DTC


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] plate choke bypass caps, kenw2dtc <=

Previous by Date:	[Amps] 813 Filament Transformer, Steve Flood
Next by Date:	Re: [Amps] 813 Filament Transformer, Steve Thompson
Previous by Thread:	[Amps] 813 Filament Transformer, Steve Flood
Next by Thread:	Re: [Amps] 813 Fil Xformer, Dennis W0JX
Indexes:	[Date] [Thread] [Top] [All Lists]