Amps
[Top] [All Lists]

Re: [Amps] Looking for 3-500Z 6 m amp info

To: 'John Farber' <kg6i@hughes.net>, amps@contesting.com
Subject: Re: [Amps] Looking for 3-500Z 6 m amp info
From: Steve Katz <stevek@jmr.com>
Date: Mon, 5 Feb 2007 11:15:45 -0800
List-post: <mailto:amps@contesting.com>
If you're familiar with the SB-220 circuit and parts, I have detailed
conversion instructions to make a 6m-only amp from that...let me know, I'll
e-mail the instructions to you.  Parts are identified by Heath component
designations to make it easy for somebody with an SB-220, may not be the
most suitable for a homebrew amp.

WB2WIK/6

-----Original Message-----
From: John Farber [mailto:kg6i@hughes.net]
Sent: Monday, February 05, 2007 11:24 AM
To: amps@contesting.com
Subject: [Amps] Looking for 3-500Z 6 m amp info


I'm converting my old HB pair of 3-500Z hf amp to a dedicated 6 m unit. I'm 
looking for info-suggestions for the tank and input circuit, also the HV 
choke. Please do not direct me to someone who wants to sell me an amp, I 
want to finish this project myself. And please, no "better to use an 8877" 
responses, I want to use what I have. I did manage to find an old reprint of

a Swan Mark 6b amp on the Bama site, but the quality was so poor, the parts 
values were unreadable. Anyone have a schematic they can scan and email me 
please?
Thanks, John KG6I 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>