Amps
[Top] [All Lists]

[Amps] EIMAC 4-1000A tube for sale

To: AMPS Mailing List <amps@contesting.com>
Subject: [Amps] EIMAC 4-1000A tube for sale
From: Bob and Bettina Groh <rgroh@swbell.net>
Date: Sun, 18 Feb 2007 15:35:50 -0600
List-post: <mailto:amps@contesting.com>
Finally getting back to the basement cleanout and I am starting on those high 
power amplifiers I mentioned sometime ago. First and easiest item to sell and 
ship is a very, very clean EIMAC 4-1000A tube.

First a bit of disclaimer: I am not an expert in these big bottles. I will 
describe what I can see and what little I can test and I will offer a guarantee 
of sorts. These items are untested other than dc continuity checks with a VOM - 
I simply don't have the facilities for testing this stuff.

History of the tube - I purchased this at an estate auction 8 or 9 years ago 
and, other than knowing that the owner was an avid ham who was really into high 
power and ham radio, I know very little about the tube's history.

What I can say is that the tube was carefully boxed up, was seemingly intended 
as a spare and that he did have two big amplifiers on site - one with a single 
4-1000A and the other with a pair of 4-1000As plus a power supply from 
h....well, just say it is a heck of a power supply. All built into a huge 6-ft 
high open-style relay rack(military surplus) with cast corners, bolted 
construction, wheels, etc. Huge! But that is for later.

The EIMAC 4-1000A itself is very clean, with no 'color' visible on it or inside 
it, no loose parts or particles and the EIMAC lettering on the glass is still 
like new. The filament does check good with a VOM. Other than that, I can't 
test 
anything else. This is probably a used tube although it does not look like it! 
It does not have a factory box.

Guarantee: I will guarantee this tube. I know that buying something like this 
is 
a big gamble so I will trust you as you, the potential buyer, are trusting me. 
If you get it and, within 3 days of receipt, you try the tube and it doesn't 
work, I will (after you send the tube back to me and I receive it in good order 
and verify that it is the same tube) give you your money back. You must pay the 
shipping cost back.  And I would like a clear cut explanation of what it 
doesn't 
do so I can decide what to do with it. I hope this is ok with everyone.

Price: well, I am really out on a limb here as I have very little idea of value 
so feel free to educate me!  I am going to ask $200 shipping included (Fed Ex 
Ground). Feel free to offer up or down.

So there you go. Please email me privately at <rgroh@swbell.net> if you are 
interested or want to offer some thoughts or advice.

73
Bob Groh, WA2CKY
420 NE Sunview Circle
Blue Springs, MO 64014-2045
(H) 816-228-6402




_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] EIMAC 4-1000A tube for sale, Bob and Bettina Groh <=