Amps
[Top] [All Lists]

[Amps] Harris RF-110A Blower Noise Silencer

To: "Dave Robinson" <ag8b@chartermi.net>, <Amps@contesting.com>
Subject: [Amps] Harris RF-110A Blower Noise Silencer
From: "Edward Gable" <EGABLE@Rochester.rr.com>
Date: Wed, 9 May 2007 22:51:01 -0400
List-post: <mailto:amps@contesting.com>
Why do you have the Amp so close to the operating position ?  There are no 
needed operator controls unless you want to turn it on and off !!  I put 
mine in the furnace room 20 feet away and remoted everything.  I admit the 
remote bandswitching is a bit messy if you don't have a matching exciter 
with the correct band coding.  If you just want to select a few ham bands 
you can home brew an interface.

/Ed  k2mp


----- Original Message ----- 
From: "Dave Robinson" <ag8b@chartermi.net>
To: <Amps@contesting.com>
Sent: Wednesday, May 09, 2007 9:41 PM
Subject: [Amps] Harris RF-110A Blower Noise Silencer


>I have created a functional equivalent of the Harris RF-125 Blower noise 
>silencer.  It is a metal utility box that fits over the blower inlet port. 
>The box is  9" x 5" x 6", comes gray painted, and you can buy it from 
>Digi-key.   If you line it with sound absorption foam (NRF =.7), it 
>completely eliminates the high frequency whine from the blower.   The 
>RF-110A sits two feet away from the operating position now.  If anyone is 
>interested, I have a 1.56mb zip file that contains a description, an actual 
>scale template, and two photos showing installation that I can send you. 
>73,
> Dave AG8B
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>