Amps
[Top] [All Lists]

Re: [Amps] Henry 2003 Filter for 20002A Amp

To: "'Roger'" <sub1@rogerhalstead.com>, <amps@contesting.com>,"'W0UN -- John Brosnahan'" <shr@swtexas.net>
Subject: Re: [Amps] Henry 2003 Filter for 20002A Amp
From: "Robert Bonner" <rbonner@qro.com>
Reply-to: rbonner@qro.com
Date: Tue, 10 Jul 2007 19:04:13 -0500
List-post: <mailto:amps@contesting.com>
Roger, just send it to STEVE.  He knows his stuff.

He has a GOLD PLATED and polished 24 Karat diddle stick.

BOB DD

-----Original Message-----
From: Roger [mailto:sub1@rogerhalstead.com] 
Sent: Tuesday, July 10, 2007 1:58 PM
To: rbonner@qro.com; amps@contesting.com; 'W0UN -- John Brosnahan'
Subject: Re: [Amps] Henry 2003 Filter for 20002A Amp

Thanks for the info.


>I would think the tuning on this filter would require a spectrum analyzer 
>or
> other high tech devices to set properly.
>
> I wouldn't touch it unless somebody has already been diddle sticking it.
>

I bought if at a swap.<:-)) Any and alll adjustments that can be made 
probably were.


> The 3002 device is completely fixed components.
>
> I'm having a bit of trouble following each reply as I've seen 2003, 2002,
> 3002, and 3003 referenced.
>

That's my typing for which I apologize and we all make our own worst proof 
reader.


> But having the actual name in one post brought it home.
>
> The amps will run without the external filter if yours is screwed up.
> (DIDDLE STICKED)
> You will have to get a hold of somebody with the equipment to re-tweak it
> back in as it will require actually sweeping the thing and setting the
> attenuation points.
>

I have the spectrum analyzer...weighs more than my whole HF station 
including the Alpha. I'll have to borrow a sweep generator or resort to the 
old armstrong sweep method, but the real sweep generator is so much easier.

> I've never done one and Henry doesn't have anybody working anymore.

They import all of their solid state amps?

73

Roger (K8RI)

>
> BOB DD
>
> -----Original Message-----
> From: Roger [mailto:sub1@rogerhalstead.com]
> Sent: Tuesday, July 10, 2007 9:31 AM
> To: rbonner@qro.com; amps@contesting.com; W0UN -- John Brosnahan
> Subject: Re: [Amps] Henry 2003 Filter for 20002A Amp
>
> Thanks,
>
> This looks like a simple, inexpensive, and good remedy if needed.
>
> 73
>
> Roger (K8RI)
>
>
>> If you need to replace the Henry 3002 filter here is a good article
>> on a harmonic filter design with reference to the original article.
>>
>> 'Stub Filters Revisited' by John Regnault, G4SWX, Radio Communication
>> (RSGB), November 1994
>>
>> http://www.ifwtech.co.uk/g3sek/swxfiltr/swxfiltr.htm
>>
>> --John  W0UN
>>
>>
>
>
> 




_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>