That is a 1982 revision of my 1961 sheet. thanks for posting it. They added
a line indicating a "brief tune up" power input as well as one for tune up
screen current. Interesting as I dont believe Ive seen them do that before.
Carl
KM1H
----- Original Message -----
From: "Peter Voelpel" <df3kv@t-online.de>
To: <amps@contesting.com>
Sent: Sunday, September 30, 2007 9:15 AM
Subject: Re: [Amps] 4CX250 IMD
> The spec sheet can be found here:
> http://www.g8wrb.org/data/Eimac/4CX250R.pdf
> SSB data is on page 2, at 470W output DC input is 750W, IMD -23db
>
> 73
> Peter
>
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of jeremy-ca
>
> Input power is 500WDC, Output is 470W PEP, not key down CW. I'll use CW
> since some seem to be getting confused with single and two tone
> references.
> Im reading the 470W reference right from the full length 6 page 4CX250R
> spec
> sheet
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|