G'day Dick,
The DX-2 needs no modifications to operate at the 1kW plus level in a
48 hour contest. The cooling is very adequate and at the 1kW level, I
know that you won't even trip the switch to go on the high speed fan
mode. Even at full steam, it will not raise a big sweat.
I have witnessed this each year, over the last 8 years in the 2 big
CQ SSB contests.
I'm talking about the 4CX-1600B model.
73, Alek
VK6APK
At 06:26 AM 2/11/2007, Dick wrote:
>Anyone with experience with the Emtron DX-2 during a 48 hour contest
>or DX-pedition?
>What is the save level to operate it in SSB and in CW during 48
>hours of operating without tripping the temperature protection?
>
>I also wonder if anyone tried to modify cooling by replacing the top
>cover for a perforated one.
>
>73 Dick
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
http://www.qrz.com/vk6apk
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|