In many amplifiers, discharging the filter capacitor bank in this way will
destroy the metering resistors and the meter.
73, Mike N4NT
----- Original Message -----
From: <bmparson@charter.net>
To: <Amps@contesting.com>
Sent: Friday, November 02, 2007 12:18 PM
Subject: [Amps] 811 amp
> If your still blowing fuses,the first thing to do is,Shut down and
> discharge.A large screwdriver is usually the weapon of choice.Pull each
> tube and check with an ohm meter to see if filiments are good.Then check
> fil transformer for output.
> -- Hope I helped a little.Barry (N4YWS)
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|