Alek Petkovic wrote:
>I am making up some meter faces for a homebrew single GS35B amplifier
>and I'm wondering about the fsd I should use. Plate volts is 3000V DC.
>
>I am proposing that the plate meter will be 1.5A fsd. What would be a
>good value for the grid current meter?
>
Peak grid current of 300mA is about right in normal operation, so the
meter could be 400 or 500mA full scale.
If you have a grid-current trip, a setting of 400-500mA would allow for
tune-up while also protecting against damage.
--
73 from Ian GM3SEK
http://www.ifwtech.co.uk/g3sek
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|