An 8877 will hi pot well over 10KV so that standing voltage is no problem.
However operating at more than 4KV is asking for problems as many have found
out. We get into uncharted territory of instability as well as rapid
cathode deterioation when pushed to the max.
Carl
KM1H
----- Original Message -----
From: "Barrie Smith" <barrie@centric.net>
To: "Rick Stealey" <rstealey@hotmail.com>; <amps@contesting.com>
Sent: Thursday, November 15, 2007 1:21 PM
Subject: Re: [Amps] 8877 plate voltage
> Rick:
>
> I run my HB 8877 6M amp at 4200 volts, which drops to 3800 volts under
> load.
> No problems in several years.
>
> Rumors abound regarding fellows who are running 5 KV, and more, on 8877s.
>
> 73, Barrie, W7ALW
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|