Amps
[Top] [All Lists]

Re: [Amps] Very Off topic : AM without sidebands ?? :-) ++

To: Nils Petter Pedersen <la7sl@online.no>, amps@contesting.com
Subject: Re: [Amps] Very Off topic : AM without sidebands ?? :-) ++
From: Radio WC6W <wc6w_amps@yahoo.com>
Date: Fri, 30 Nov 2007 12:25:38 -0800 (PST)
List-post: <mailto:amps@contesting.com>
Hi Nils,
  I'm not familiar with the hardware on your side of
the pond but, over here the prefernce is to employ
plastic for the pipes & gutters which might explain
the recent decline in incidental reception.  :)

73 & Good afternoon,
  Marv WC6W 

http://wc6w.50webs.com/


--- Nils Petter Pedersen <la7sl@online.no> wrote:

> 
> 
> 
> Hi all !
> Very OFF TOPIC,.. but I risk beeing flamed or
> blamed:
> My late father was a well known electronics and
> radio specialist here in
> Norway, running his own company. Off the record he
> told me  a few things
> he always wondered about. One thing was that "in the
> old days" they
> always experienced a lot more unwanted rectification
> (detection) of
> AM signals in MECHANICAL devices like rain gutters,
> downpipes and so
> on, giving rise to actual Audio Output from these
> non-electronic things.
> He claimed that near QRO AM transmitters people used
> to hear the news
> from the strangest of things... He had also noted
> that in "modern days"
> this did not seem to happen very often. This gives
> rise to Q no. 1:
> What changed,- if anything ??
> Now to part 2 :
> AM modulation is generated by mixing a carrier and
> an audio signal in a
> nonlinear process. If it was 100% linear, according
> to the maths no 
> modulation would result, and in the output you would
> find an amplified
> audio signal and an amplified but unmodulated
> carrier
> What if you actually succeeded to modulate in a
> linear stage? I KNOW
> that this is mathematically impossible by todays
> maths, but let your
> thoughts flow freely, and picture a variable, linear
> resistance bridge
> that varies with the audio drive. To avoid traps
> please figure this in the
> antenna output of a transmitter. The resistance
> bridge is modulating a
> clean RF carrier while maintaining a constant load (
> like an ideal attenuator)
> It responds to the full audio bandwith. Avoid the
> statement that a varying resistance
> can not be considered linear,- or state that as a
> fact,- if you like.
> Clearly and surely if you tried to analyze this "AM"
> signal with modern
> methods it will show sidebands. Analyzers and
> receivers use nonlinear
> mixers and/or detectors. But if you could analyze it
> with a linear detector ??----
> 
> a WHAT ??? !!    Well,- i AM ( :-) ) educated in
> electronics, but I have the
> ability to "let my brain run wild " :-)
> Do You ?
> I will standby for a while and watch any message !
> and finally: How is part 1 of this message and part
> 2 connected ?
> Yours
> LA7SL " Peter"
> ____________________________________________
> 
> "I don't suffer from insanity. I enjoy every minute
> of it"
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 



      
____________________________________________________________________________________
Be a better sports nut!  Let your teams follow you 
with Yahoo Mobile. Try it now.  
http://mobile.yahoo.com/sports;_ylt=At9_qDKvtAbMuh1G1SQtBI7ntAcJ
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>