Amps
[Top] [All Lists]

[Amps] My HV supply design.

To: Amps@contesting.com
Subject: [Amps] My HV supply design.
From: "Patrick Egloff" <pegloff@gmail.com>
Date: Mon, 31 Dec 2007 19:41:34 +0100
List-post: <mailto:amps@contesting.com>
Hi all,

I'm back in the "business" after several very busy months and i'm continuing
my 2m amplifier project. (4CX1500B)
I'm still collecting parts and i will start with the power supplies.

I made a diagram of my HV supply and i'ld be happy if you could look on it
and say if everything seems OK.

I added :
- step-start
- glitch protection
- current overload detection
- voltage lack detection
- current measure
- voltage measure (both with external meters)

I used the components i've actualy found. For example, the K1 ON/OFF relay
could better be a DPST instead of a SPST...

The diagram can be seen here :
http://tk5ep.free.fr/tech/PA2m/datas/HV%20supply.gif

Any comments are welcome.

73 and a very happy new year to all readers,
Patrick

-- 
Patrick Egloff - TK5EP
email : pegloff@gmail.com
Fax : +33 826 698 954
Web page : http://tk5ep.free.fr
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>