John,
No, I have not tried to email them. If fact, I don't have any contact
info for Covimag at all (yet).
It would be my guess they would not be forth coming with historical info
from 1980 and, since the current published data sheet is a photo copy of
an Eimac data sheet, I'd bet they wouldn't talk much about current
production either.
Larry
Larry - W7IUV
DN07dg
http://w7iuv.com
John Lyles wrote:
> Larry
> Have to tried emailing Covimag and asking them this question about mu? It
> appears (?) that they are no longer owned by Richardson, but still supply
> tubes to them. Covimag is one of the few manufacturers of quality 3-500Z
> remaining, the Amperex variant - since Triton was unable to make/sell the
> Eimac design. However, they cannot be paired with Eimac versions for the
> obvious reason you have pointed out.
> 73
> John
> K5PRO
>
>> Message: 9
>> Date: Thu, 31 Jan 2008 08:36:47 -0800
>> From: Larry <larry@w7iuv.com>
>> Subject: [Amps] More Amperex 3-500Z
>> To: AMPS <amps@contesting.com>
>> Message-ID: <47A1F91F.1020700@w7iuv.com>
>> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>>
>> Thanks to all that replied with info. I had hoped there would be more
>> definitive data, but the mystery still remains.
>>
>> Here's what I know for sure:
>>
>> In 1969 Amperex was owned by North American Phillips. The 3-500Z *MAY*
>> have been manufactured in Holland. It may have been inspired by the
>> 3-400Z but according to the short form catalog I have, it was NOT just a
>> 3-400 with a bigger anode. There are other differences listed. The Mu at
>> this time was 200 or more depending on which set of data you are
>> inclined to believe.
>>
>> At some point between 1969 and 1980, manufacturing was moved to France.
>> Amperex was still owned by Phillips in 1980. It is not known if the Mu
>> spec was changed coincidently with the move or not. My tubes are date
>> coded 1980.
>>
>> In 1985 or 1986, Amperex was purchased by Richardson Electronics as part
>> of their world wide takeover of tube manufacturers. It is not clear if
>> only the name was purchased or if the production facility was included
>> in the deal.
>>
>> Today, The Amperex name is still owned by Richardson. The tube is
>> manufactured in Brive, France by COVIMAG. It is not clear if COVIMAG is
>> a subsidiary of Richardson or just under contract for production. If you
>> go to the Amperex/COVIMAG/Richardson web page (which is not easy to find
>> by the way) and click on the 3-500Z data sheet, a PDF of the Eimac 1980
>> 3-500Z data sheet pops up!!
>>
>> What is clear is that at least once during the long production life of
>> the Amperex branded tube that the Mu spec changed. Possibly more than
>> once. What is very unclear is when these changes actually took place.
>>
>> If current production tubes are built to the Eimac spec, then the RF
>> Parts statement that they take more drive is false. If the tubes were
>> built to the old Amperex spec, then the statement must also be false.
>> Some folks claim more drive, some say the same drive, but nobody offers
>> date codes for the tubes they used. The only way they could require more
>> drive is if the Mu were to be drastically lower or the user failed to
>> adjust the bias voltage for the proper idle current.
>>
>> This matters to me for two reasons. First is that I'd simply like to
>> know the answer. Secondly I need to know to meet the design goals I have
>> arbitrarily established for my latest project. Yes, I know, there is no
>> on-the-air difference to be seen. But I already have a 1200 watt drive
>> limited amp. The whole object of this particular project was to meet the
>> 1500 watt limit EVEN THOUGH I DON'T NEED IT!
>>
>> It would be easy to plug them in a test but doing so even for a couple
>> minutes will drastically reduce the sell price if I do wind up selling
>> them. RF Parts currently lists Amperex 3-500Z's at $269 bux. Ebay prices
>> on tubes the are NIB with the seals intact will surely approach that.
>>
>> Anybody interested at $500 for the pair postpaid USA?
>>
>> 73, Larry
>> --
>> Larry - W7IUV
>> DN07dg
>> http://w7iuv.com
>>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|