jeremy-ca wrote:
> Hmmm, his description says it is modified for 220.
Isn't that "modifiable" to 220?
Although advertised as a 2-meter amp, "I'd guess" it's one of those that
was used for plasma or industrial heating at 200 MHz that can be
modified for 220. Some outfit has had a similar one in very nice shape
(with new tube)on there since last Fall with no takers. Their BIN price
has finally started down. Unless they find some one who really wants
(and can use) one for 220 both are basically parts amps.
I purchased one all set up for the 2-meter band in good shape that only
required a good cleaning for less than he's asking for one that may
require a lot of work. I was learning about building filters for it on
here last summer.
73
Roger (K8RI)
> Carl
> KM1H
>
>
> ----- Original Message ----- From: "Roger (K8RI)"
> <sub1@rogerhalstead.com>
> To: "Amps" <amps@contesting.com>
> Sent: Saturday, March 22, 2008 7:59 PM
> Subject: [Amps] What is this amp set up for
>
>
>> the amp listed on
>> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=350038955687&ssPageName=ADME:X:AAQ:US:1123
>>
>>
>> is listed as a 2-meter amp but the specs list it as 200 MHz +/-10 Mhz.
>> Also the output filter is far smaller than the one in my 2002A which is
>> set up for 2-meters.
>>
>> 73
>>
>> Roger (K8RI)
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|