Amps
[Top] [All Lists]

Re: [Amps] Harbach Elec now selling Peter Dahl Xfmrs

To: "Rich Hallman - N7TR" <rich@n7tr.com>, <amps@contesting.com>
Subject: Re: [Amps] Harbach Elec now selling Peter Dahl Xfmrs
From: "jeremy-ca" <km1h@jeremy.mv.com>
Date: Sun, 4 May 2008 16:04:09 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Having been involved with a local transformer company before the owner died 
I can appreciate the several minutes it takes a girl to transition to other 
windings.

With several replacement designs for ham amplifiers I competed directly with 
Dahl and both the xfmr company and myself made a respectable profit while 
being about 25-30% below Dahl prices.

My last Dahl purchase was about 2 years ago and Gary regularly adjusted 
prices to reflect rising costs, the price sheet was always slow to catch up 
if at all.

Recent trade journals are predicting a 75% increase in steel prices from 
Asia by the end of this year, particularly from China. Im sure speciality 
steels will also be affected.

Carl
KM1H


----- Original Message ----- 
From: "Rich Hallman - N7TR" <rich@n7tr.com>
To: "Rich Hallman - N7TR" <rich@n7tr.com>; <amps@contesting.com>
Sent: Sunday, May 04, 2008 3:18 PM
Subject: Re: [Amps] Harbach Elec now selling Peter Dahl Xfmrs


>I just got a reply back from Jeff and he stated due to this specific
> transformer (Ten-Tec Titan 425) having 5 secondary's and multiple layer
> windings, the major price increase is in the cost of the copper wire and
> silicon steel used in the Hipersil cores.  Also....PWD price sheet was
> pretty flat since 2000. Jeff stated most of the other transformers are
> pretty close to the original PWD costs.
>
> I think it's great that the PWD line continues to be available, I just
> will wait to replace the ones in my Titan 425's when they actually fail.
>
> If you have questions...email Jeff directly off the Harbach web site.
> He has been very responsive to all my questions.
>
> Thanks...
> Rich
>
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]
> On Behalf Of Rich Hallman - N7TR
> Sent: Sunday, May 04, 2008 8:17 AM
> To: Gudguyham@aol.com; amps@contesting.com
> Subject: Re: [Amps] Harbach Elec now selling Peter Dahl Xfmrs
>
> I sent a second email to confirm the price, but the first email was
> pretty specific for a replacement Titan 425 transformer the price was
> $550. The specs looked like a cut and paste from the original PWD specs,
> so nothing looked like it changed there.
>
> Also...PWD web site is still available and has the old prices still
> listed.
> http://www.pwdahl.com/ham%20catalog.htm
>
> Rich
>
>
> From: Gudguyham@aol.com [mailto:Gudguyham@aol.com]
> Sent: Sunday, May 04, 2008 8:07 AM
> To: Rich Hallman - N7TR; amps@contesting.com
> Subject: Re: [Amps] Harbach Elec now selling Peter Dahl Xfmrs
>
> In a message dated 5/4/2008 10:02:53 A.M. Eastern Daylight Time,
> rich@n7tr.com writes:
> Prior to the closure of PWD in December, I was going to replace the four
> Titan 425 amp transformers with Peter Dahl.  Cost was around $350 each
> at the end of last year.  Was just quoted $550 for the same transformer.
> I think Ill hold off for now...
>
> 73  Rich
> Hi Rich, Did the prices really go up that high with the change in
> ownership?  You would think that $550.00 wsould buy you at 2 amp CCS
> transformer at 3000vac.  Could there be some mistake?  Lou
>
>
>
> Wondering what's for Dinner Tonight? Get new twists on family favorites
> at AOL Food
> <http://food.aol.com/dinner-tonight?NCID=aolfod00030000000001> .
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>