Amps
[Top] [All Lists]

Re: [Amps] Roller Inductor info

To: "Mike Short" <mike.short@mchsi.com>, "Amps@Contesting. Com" <amps@contesting.com>
Subject: Re: [Amps] Roller Inductor info
From: "EP Swynar" <gswynar@durham.net>
Date: Mon, 28 Jul 2008 12:54:38 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Hi Mike,

That's an easy one to answer, IF you have most any copy of THE RADIO
AMATEUR'S HANDBOOK in front of you...

To whit, wire size #14 in a coil will handle:

-500-watts of input on 1.8- & 3.5-MHz;
-150-watts of input on 7- and 14-MHz, and,
-75-watts of input on 21- and 28-MHz.

~73!~ Eddy VE3CUI - VE3XZ


*****************************************


----- Original Message ----- 
From: "Mike Short" <mike.short@mchsi.com>
To: "Amps@Contesting. Com" <amps@contesting.com>
Sent: Monday, July 28, 2008 11:22 AM
Subject: [Amps] Roller Inductor info


> I have a roller inductor for sale on EBay, and I had a question from
someone
> about power handling.
> It is a GE 25uH, and the wire appears to be 14-16ga on the roller. Could
> some of you experts take a look at it
> and see what you think about how much power it can handle? It is ebay item
> #170244243038,
> I can also send some pics as well.
>
> Mike
>
>
>
>
>
> Mike Short
>
> AI4NS
>
> AI4NS@arrl.net
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>