Amps
[Top] [All Lists]

[Amps] Mirage amp identification HELP

To: amps@contesting.com
Subject: [Amps] Mirage amp identification HELP
From: Jacob Tennant <k8jwt@comcast.net>
Reply-to: k8jwt@comcast.net
Date: Fri, 08 Aug 2008 20:40:17 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
A friend of mine has a MIRAGE amplifier that someone has removed all 
identification from and we were hoping to find out what model it is.

On the front,from left to right, there is a green led that comes on when 
power is applied, a square hole covered with a metallic film, and two 
small hole beside each other approx. 1 inch apart.

On the back it has the normal "N" connectors marked for radio and 
antenna, power cable,and 2 small holes approx. 1/2 inch away from the 
coax connectors.

There is one small label across the back plate the says FREQ. 70CM 
2W-20W S/N 04-386R

That is all of the identifying marks on the outside, on the inside is 
the pcb board of the amplifier but nothing to identify its model.

Any help would be appreciated we are hoping to use this amp for 70cm ATV.

Jacob Tennant - K8JWT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>