| To: | <Amps@contesting.com> |
|---|---|
| Subject: | [Amps] Alpha 374A |
| From: | "Robert Perdue" <kc0hfl@cox.net> |
| Date: | Mon, 11 Aug 2008 13:43:36 -0500 |
| List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
Metal work is all done on the 3cx800 conversion now I am on to the filament voltage and need some thoughts. Not much room for an on board 12v transformer so I was thinking about using a voltage doubler using existing 6.3V winding on original transformer. Any thoughts on the best route to take. 73,Bob _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [Amps] (3) Really Good 8874's FS, Craig Anderson Ext 1365 |
|---|---|
| Next by Date: | Re: [Amps] Alpha 374A, Steve Katz |
| Previous by Thread: | [Amps] Alpha 374A, Robert Perdue |
| Next by Thread: | Re: [Amps] Alpha 374A, Steve Katz |
| Indexes: | [Date] [Thread] [Top] [All Lists] |