[Top] [All Lists]

Re: [Amps] P/S connector

To: Steve Flood <>,
Subject: Re: [Amps] P/S connector
From: Radio WC6W <>
Date: Sun, 26 Oct 2008 18:34:01 -0700 (PDT)
List-post: <">>
Hi Steve,
  I use D connectors for that purpose myself.  The 15 pin parts between the amp 
and the power supply.

  I might have some 5 or 6 pin AN connectors kicking around if you want to go 
"Mil-Spec"  :-)

  I know for certain that I have some with a few more pins available.  See the 
bottom of my webpage at:

73 & Good evening,
  Marv WC6W

--- On Sun, 10/26/08, Steve Flood <> wrote:

> From: Steve Flood <>
> Subject: [Amps] P/S connector
> To:,
> Date: Sunday, October 26, 2008, 3:39 PM
> My homebrew amp power supply is coming along nicely.  I need
> to get 5 connections to the amp via a connector (B minus,
> ground, 120v hot and neutral, relay line for primary
> contactor).  I had been shopping for a cheap deal on those
> nice CPC circular mil-style connectors but no luck yet.   My
> other thought was to use tube sockets and plugs as I have
> several, but thought I'd pick the brain trust first for
> experiences on using either.
> Tnx, Steve KK7UV   
> _______________________________________________
> Amps mailing list

Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>