Hey Tom...
I did not tape each core. Just tape all 3 cores together.
And yes, I still owe you some pictures! :)
73
Jim W7RY
----- Original Message -----
From: TMorton
To: amps@contesting.com
Sent: Wednesday, November 12, 2008 9:31 AM
Subject: [Amps] Core wrapping?
Am in the process of building up a 8877 amp and now working on the Tank
Circuit coils....I am pretty much following the ARRL Handbook 2006 for
L4 and L3 (160,80m). to handle the high power, I am using 3x T300-2
cores with #10 Teflon silver wire and 3x T225-2 cores w/teflon, etc. My
question is when 'stacking' the cores do I stack the 3 cores then wrap
the fiberglass tape around them OR do I individually wrap each of the 3
cores with the glass tape then do an additional wrap over the 3 of them
together?
Tnx
73
Tom
CX7TT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|