Amps
[Top] [All Lists]

Re: [Amps] inductor between plate and blocking cap

To: "Lynn Osterbur" <no9z@yahoo.com>, <amps@contesting.com>
Subject: Re: [Amps] inductor between plate and blocking cap
From: "Richard Hill" <rehill@ix.netcom.com>
Date: Sat, 6 Dec 2008 17:17:09 -0800
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Another source of updated copies:
http://www.arrl.org/catalog/?category=&words=handbook&SearchWords.x=11&Searc
hWords.y=8 or
http://tinyurl.com/66klbn

Rich
NU6T

-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
Behalf Of Lynn Osterbur
Sent: Saturday, December 06, 2008 7:53 AM
To: amps@contesting.com
Subject: Re: [Amps] inductor between plate and blocking cap


    I finally found the information I was looking for along with a very good
article
on amp building.  Chapter 18

http://mxh.strefa.pl/pliki/tech/book2006/18.pdf

NO9Z



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>