You can "ring it out" with ohm meter and then test at reduced voltage with a
variac?
That is what I would do.
Paul K0UYA
----- Original Message -----
From: "fitter4" <fitter4@comcast.net>
To: <amps@contesting.com>
Sent: Sunday, December 28, 2008 6:24 PM
Subject: [Amps] help on a old transformer
>i have a Chicago Transformer model 13253 need the wireing diagram on it its
>a 249vac input with a 6200 vac ct output
> i havent been able to find any info on it any help would be of great help
> mike w5mdc
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|