[Top] [All Lists]

[Amps] filament voltage dropping??

Subject: [Amps] filament voltage dropping??
Date: Sun, 11 Jan 2009 18:13:59 -0500
List-post: <">>
Are there any advantages to dropping on the primary side or the secondary side 
? This is on a K2RIW style amp for 432 mhz. The tubes are a pair of 8930s. I 
need to go from 6.3 to 5.5 or so. Mike
Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>