The NCL works fine on 17M in the 15M position but the Q is a bit high,
Operate only in the CW position, is linear for SSB.
With 200W being the legal limit on 30M in the USA I have no suggestions
for that .
Carl
KM1H
National Radio 1963-69
Member of NCL-2000 Design Team
----- Original Message -----
From: <TexasRF@aol.com>
To: <franktbrady@comcast.net>; <amps@contesting.com>
Sent: Sunday, January 18, 2009 10:55 AM
Subject: Re: [Amps] My NCL-2000 warc band experiments
> Frank, asking out of curiosity here: did you by chance try 30m with
> the 20m
> position and 17m with the 15m position?
>
> If there is enough C in the variable caps you might reach resonance
> without
> having to add the coils taps. Granted the loaded Q will be higher but
> at these
> relatively low frequencies (compared to 10m) might work ok.
>
> On the heating effect; it is fundamentally an I squared times R thing.
> The R
> could be higher, the I could be higher or both. I do know that a
> soldered tap
> will be much lower loss than the limited contact area provided by
> alligator
> clip teeth.
>
> 73,
> Gerald K5GW
>
> **************A Good Credit Score is 700 or Above. See yours in just 2
> easy
> steps!
> (http://pr.atwola.com/promoclk/100000075x1215855013x1201028747/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072%26hmpgID=62%26bcd=De
> cemailfooterNO62)
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|