Amps
[Top] [All Lists]

Re: [Amps] Pi Network inductors..

To: robert briggs <vk3zl@bigpond.com>, amps@contesting.com
Subject: Re: [Amps] Pi Network inductors..
From: Ryan Foster <foster.ryan@gmail.com>
Date: Mon, 9 Feb 2009 09:26:00 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
If you ever do find this information, could you pass it on or make
sure it is posted if it is from off forum?  I also picked up a Dentron
amp that had such a problem added to it.  If will still work on 10,
but not all that well comparatively.

Thanks & 73

--Ryan w8cya


On Sun, Feb 8, 2009 at 9:19 PM, robert briggs <vk3zl@bigpond.com> wrote:
>
> Hi all...I have been requested to make a new set of inductors for the Pi
> output network for a Dentron 160-10L amplifier...It would appear that
> this unit was chopped for use on 11 meters and the new owner wishes to
> restore the unit...
>
> Has anyone got the coil dimensions uh etc?? If I can get the correct
> information it is a straight forward job to make up a complete set for him..
>
> 73..Bob VK3ZL..
> _______________________________________________
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>