Amps
[Top] [All Lists]

Re: [Amps] Fw: Nichrome wire for suppressors

To: John <jmltinc@aol.com>, amps@contesting.com, Carl <km1h@jeremy.mv.com>
Subject: Re: [Amps] Fw: Nichrome wire for suppressors
From: DAVE WHITE <mausoptik@btinternet.com>
Date: Wed, 11 Feb 2009 22:03:35 +0000 (GMT)
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Here we go again.........

Seconds out, handbags at two paces......

--- On Wed, 11/2/09, Carl <km1h@jeremy.mv.com> wrote:
From: Carl <km1h@jeremy.mv.com>
Subject: Re: [Amps] Fw:  Nichrome wire for suppressors
To: "John" <jmltinc@aol.com>, amps@contesting.com
Date: Wednesday, 11 February, 2009, 7:43 PM

The USA military has kept your sorry a** safe so far comrade.

Carl


----- Original Message ----- 
From: "John" <jmltinc@aol.com>
To: <amps@contesting.com>
Sent: Wednesday, February 11, 2009 1:20 PM
Subject: [Amps] Fw: Nichrome wire for suppressors


> >Since the Mumetal method was approved by the US government it does 
> >make
>>it valid and acceptable.
>
>>Carl
>>KM1H
>
> There is nothing from the Government which could make anything valid 
> or acceptable.
>
> -John, N9RF
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>