My Ameritron amp diode board with 1N5408 diodes has .01M 1KV caps across
them.
Doug
The train doesn't stop here anymore.
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]
On Behalf Of Gary Schafer
Sent: March 1, 2009 2:25 PM
To: 'Steve Flood'; amps@contesting.com; rfamplifiers@yahoogroups.com
Subject: Re: [Amps] caps across rectifier diodes
No, modern diodes don't need or want resistors or capacitors across
them.
73
Gary K4FMX
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]
On
> Behalf Of Steve Flood
> Sent: Sunday, March 01, 2009 11:53 AM
> To: amps@contesting.com; rfamplifiers@yahoogroups.com
> Subject: [Amps] caps across rectifier diodes
>
> I am using a string of 4 6A10 diodes in each leg of my HV power
supply.
> Should these each have a .01uF 1kv cap across them? I see some
designs
> that do this and some do not.
>
> Tnx,
> Steve KK7UV
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|