With only a mu of 36 you would need a couple of 811's to drive them and
the voltage swing needed would have them sounding like a CB amp.
Great Class C RF or B modulator tube. I use a pair as modulators for one
of the big old style amps here.
Carl
KM1H
----- Original Message -----
From: "George Knight" <gkve3ltu@sympatico.ca>
To: <amps@contesting.com>
Sent: Wednesday, March 11, 2009 3:15 PM
Subject: [Amps] 810 Linear Amp
> Hi All,
> I am considering using four 810 triodes parallel connected in a
> grounded grid amp. Plate voltage would be about 2500 v. and expected
> output power should be close to a kilowatt. Has anyone in the group
> made such an animal, and if so, how did it turn out and what pitfalls
> should I avoid? Any info on operating parameters such as bias would be
> very welcome.
> Thanks and '73 ,
> George, VE3LTU.
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|