Amps
[Top] [All Lists]

Re: [Amps] 4100VDC@ 2 Amps

To: "Jeff Allen" <jeff@kb9ysj.com>, <amps@contesting.com>
Subject: Re: [Amps] 4100VDC@ 2 Amps
From: "Carl" <km1h@jeremy.mv.com>
Date: Mon, 16 Mar 2009 11:39:28 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
3CPX1500A7, a pulse rated 8877.

Or go with the big boys and a YC-156. At 100W drive it will easily run 
legal with a bit of overhead AND last forever.

Both tubes are readily available as medical amp pulls.

Carl
KM1H



----- Original Message ----- 
From: "Jeff Allen" <jeff@kb9ysj.com>
To: <amps@contesting.com>
Sent: Sunday, March 15, 2009 4:18 PM
Subject: [Amps] 4100VDC@ 2 Amps


> What single Tube, GG can I use to get the best results from 160-10M? 
> The
> amp is already built using 2 GS35B Tubes. But I think the 2 tubes are 
> to
> unstable?? 4100VDC PLATE@2AmpsCCS  PeterD
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>