Do it all. The Heathkit Shop has a complete drop in board available
http://www.theheathkitshop.com/page8/page8.html
Also ask him about the new parasitic suppressors that I designed. And
get back to me later about other RF improvements for the L.
Here is a source to have the transformer rewound.
http://members.tripod.com/tubes_tubes_tubes/transformerrewindingservice/
Carl
KM1H
----- Original Message -----
From: "mike stokes" <mike9v@gmail.com>
To: <amps@contesting.com>
Sent: Friday, March 20, 2009 8:19 AM
Subject: [Amps] Clipperton L advice
>I was given a Clipperton L 5 years ago and was told the Primary on the
> transformer was shorted. Finally getting around to working on it and
> I have
> confirmed the transformer is bad as well as the diode string the
> voltage
> doubler circuit is shorted. My questions are as follows:
>
> Should I totally rebuild the power supply replacing all diodes, caps
> etc, or
> just those that have failed?
>
> Any other Mods I should implement? I will look into the poor
> performance
> on 160 after I get it working.
>
> Thanks in advance.
>
> Mike Stokes
> KK9V
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|