To: | amps@contesting.com |
---|---|
Subject: | [Amps] GS35B |
From: | Ezequiel Reinaldi <lu1fdu@yahoo.com.ar> |
Reply-to: | lu1fdu@yahoo.com.ar |
Date: | Sat, 4 Apr 2009 13:19:59 -0700 (PDT) |
List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
Hi i am LU1FDU Ezequiel from Las Rosas Argentina my question is what usually configuration (voltages, amps, rms power out, etc....) is used for one (or two) GS35B for HF contest use, How much power you can get from one or two of these tubes at 3, 4 or 4.5 kv on plate, with a normal tube life. i think use these tube because they have a good price/benefit factor but there is another more suitable tube for 2 to 4 kilowatts out ??? 73 Ezequiel Yahoo! Cocina Recetas prácticas y comida saludable http://ar.mujer.yahoo.com/cocina/ _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [Amps] Does ANYONE know what the zero signal anode current should be for a pair of 3CPX800A7 tubes? (Don Kessler), John Lyles |
---|---|
Next by Date: | [Amps] Zero signal current 3CPX800A7, Dennis W0JX |
Previous by Thread: | [Amps] Does ANYONE know what the zero signal anode current should be for a pair of 3CPX800A7 tubes? (Don Kessler), John Lyles |
Next by Thread: | [Amps] Zero signal current 3CPX800A7, Dennis W0JX |
Indexes: | [Date] [Thread] [Top] [All Lists] |