Thanks Bill, maybe Rex's idea is the way to go. Diodes are cheap and his idea
would only require 2 more strings. Each xfmr should then only see half of the
total voltage.
Mike K6MDS
-----------
...Or you could run each secondary to its own FWD then put the two
doublers in series...
-Rex-
K1HI
-----------
You need to be careful when putting the secondaries in series with the
primaries in parallel. Depending on how the rectifier part is wired
you might exceed the voltage rating between the secondaries and the
primary, or between the secondaries and the core.
Just something to keep in mind.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|