Many 1500-2500W+ commercial amps use the Centralab JV-9000 series which
is now owned by Electroswitch and available thru Mouser under their part
#. Its also a very common fleamarket switch as it was used in all sorts
of industrial products for decades.
Any Radioswitch Corp designed switch is serious overkill for a properly
designed tank circuit at those power levels. Mounting the switch on an
insulating material increases the critical area voltage withstanding.
Carl
KM1H
----- Original Message -----
From: "chuck" <ka1mwp@comcast.net>
To: <amps@contesting.com>
Sent: Wednesday, April 22, 2009 1:03 PM
Subject: [Amps] Bandswitch search
> I'm looking for a new bandswitch, the model 88 I have only has one
> wafer and
> I need 2 now.
>
> who besides, RF parts and Surplus sales has these things? I can wait
> for a
> local flea but like to shop!
>
> I'm putting about 2300v on the plate of the tube, amp should run 1500
> no
> problem all day long so the '88 I have
> is a bit of overkill. I can go a bit smaller.
>
>
> ~ka1mwp
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|