ORIGINAL MESSAGE:
On Wed, 22 Apr 2009 08:42:12 -0700, "Van K7VS" <wa7fab@cdsnet.net>
wrote:
>
>Can anyone tell me why the SB-1000 does not follow the 80 meter band tuning
>range?
REPLY:
I have an SB-1000 that had a defective padder capacitor brand new
right out of the box. This is the little doorknob type cap. The screw
connection is soldered to the ceramic and the solder joint had broken
loose. I resoldered it and it has worked fine ever since. Hope this
helps.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|