Very good point, thanks for mentioning that I never thought about the
voltage rating of the feedline at the higher SWR. Can specs be found for
the various types of coax showing their max voltage? A chart would be nice.
73,
Scott
----- Original Message -----
From: "Bill, W6WRT" <dezrat1242@yahoo.com>
To: <amps@contesting.com>
Sent: Wednesday, April 22, 2009 6:53 PM
Subject: Re: [Amps] High SWR
> ORIGINAL MESSAGE:
>
> On Wed, 22 Apr 2009 17:39:22 -0400, Pete Smith <n4zr@contesting.com>
> wrote:
>
>>, but SWR, per se, is not
>>something to worry yourself about, so long as the amplifier can match the
>>load.
>
> REPLY:
>
> I agree up to a point. The main villain with SWR, IMO, isn't loss, it
> is the excess voltage present on the line. Most coax, even the RG-213
> size, is rated for only 600 volts. If you have a 2:1 SWR at 1500 watts
> you are living on the edge already. Go to 3:1 and you have crossed the
> line.
>
> I won't say it can't be done, but a wise op won't.
>
> 73, Bill W6WRT
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.238 / Virus Database: 270.12.2/2074 - Release Date: 04/22/09
08:49:00
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|