Amps
[Top] [All Lists]

Re: [Amps] High SWR,

To: <amps@contesting.com>
Subject: Re: [Amps] High SWR,
From: "KB0NLY" <kb0nly@mchsi.com>
Date: Wed, 22 Apr 2009 21:47:53 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Why doesn't someone finally kick Carl off here for god's sake?  I can't 
remember the last time he contributing something on topic or worth reading. 
I was on a different computer today when his comments came through, forgot 
to block him on here, now he is in the block list on both computers.

73,

Scott


----- Original Message ----- 
From: "Gary Schafer" <garyschafer@comcast.net>
To: "'Carl'" <km1h@jeremy.mv.com>; <ve3zi@rac.ca>; "'Amps'" 
<amps@contesting.com>
Sent: Wednesday, April 22, 2009 9:28 PM
Subject: Re: [Amps] High SWR,


> Well, spouting off can be a good thing. That's what the reflector is for. 
> So
> people can learn from one another. Plus it provides some entertainment for
> us old farts.
>
> 73
> Gary  K4FMX
>
>> -----Original Message-----
>> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
>> Behalf Of Carl
>> Sent: Wednesday, April 22, 2009 8:35 PM
>> To: ve3zi@rac.ca; Amps
>> Subject: Re: [Amps] High SWR,
>>
>> Roger, youre correct; its been said so many times you would think it
>> would sink in.
>>
>> But with noobs from the CB/FM ranks old myths die hard. They cant be
>> bothered buying a Handbook or Antenna Manual and just spout off on here
>> and elsewhere with zero idea of what they are talking about.
>>
>> Carl
>> KM1H
>>
>>
>> ----- Original Message -----
>> From: "Roger Parsons" <ve3zi@yahoo.com>
>> To: "Amps" <amps@contesting.com>
>> Sent: Wednesday, April 22, 2009 8:13 PM
>> Subject: Re: [Amps] High SWR,
>>
>>
>> >
>> > I know this has been said before, but just because your SWR meter says
>> > there is x Watts of power coming back down the line, it doesn't mean
>> > that it is being dissipated in your transmitter. All it means is that
>> > the transmitter sees a load other than 50 Ohms (or whatever) - and it
>> > may or may not be able to match it. If you have a really bad mismatch
>> > you can (apparently) have the situation that your 100W transmitter is
>> > (say) transmitting 1kW and getting 900W back. Obviously that can't
>> > really happen - the reason that it seems to is that the SWR meter is
>> > measuring Volt-Amperes (reactive power) rather than Watts (real
>> > power) - that is that the current and voltage are not in phase -
>> > except in the special case of a 1:1 SWR.
>> >
>> > 73 Roger
>> > VE3ZI
>> >
>> >
>> >
>> >
>> > _______________________________________________
>> > Amps mailing list
>> > Amps@contesting.com
>> > http://lists.contesting.com/mailman/listinfo/amps
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.238 / Virus Database: 270.12.2/2074 - Release Date: 04/22/09 
08:49:00

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>