Amps
[Top] [All Lists]

Re: [Amps] SB 220 with 3 400 tubes

To: WLI <lgp@wlionline.com>, amps@contesting.com
Subject: Re: [Amps] SB 220 with 3 400 tubes
From: Colin Lamb <k7fm@teleport.com>
Reply-to: Colin Lamb <k7fm@teleport.com>
Date: Mon, 27 Apr 2009 12:53:51 -0700 (GMT-07:00)
List-post: <amps@contesting.com">mailto:amps@contesting.com>
It has been noted that the 3-400 has a lower plate dissipation than the 3-500.  

However, it is not quite that simple.  The dissipation is controlled by the air 
blowing by, and both the power supply and the air will limit the power 
dissipation of the amplifier.  

The power dissipated by each tube is roughly the input power, less the output 
power, divided by two.  The amount of heat withdrawn from the amp is controlled 
by airflow and will be roughly the same for each tube.  My experience with both 
the Drake and Heat series is that they like to run at about 1200 - 1300 watts 
output, and will do so for a long time.

So long as the 3-400 tube is operating within limits, it will work the same as 
the 3-500 tube.

73,  Colin  K7FM
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>