Amps
[Top] [All Lists]

Re: [Amps] Doorknob Caps Needed

To: "RICHARD SOLOMON" <w1ksz@q.com>, "Amplifier Reflector" <amps@contesting.com>
Subject: Re: [Amps] Doorknob Caps Needed
From: "Steve Katz" <stevek@jmr.com>
Date: Wed, 27 May 2009 13:54:06 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
RF Parts has a lot of this stuff.  Don't know where the 100 pF was used, but in 
many amps if this is a DC blocking/RF coupling cap between tube(s) and plate 
tank circuit (for example), the capacitance value isn't critical at all...

http://rfparts.com/caps_ceramicdoor.html#spraguespecial

WB2WIK/6

-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
Behalf Of RICHARD SOLOMON
Sent: Wednesday, May 27, 2009 1:47 PM
To: Amplifier Reflector
Subject: [Amps] Doorknob Caps Needed



I have given up on the idea of repairing this cap. Does anyone

have for sale or know a source of 100 pF 10 KV Doorknobs ?

 

I need two of them.

 

73, Dick, W1KSZ
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>