Carl wrote:
> Thats because some lack the ability to do independent research and have to
> depend on others to answer the questions.
>
> I suspect it all begins back in the "Why mommy" days.
>
>
Or it might have to do with trying to find technical information on
something on Google for hours and being directed to commercial sites
instead of informative ones. OTOH there is so much misinformation out
there on technical subjects that you have to already know enough about
the subject to weed out the misinformed and intentional misdirection.
I've given up enough times that anymore I don't always think of Google
to find things. To me, Google is no where near as useful as it was a
couple years back. However if I want to purchase something, it'll come
up with so many sites/sellers I then have to spend time finding out
which ones are reputable.
73
Roger (K8RI)
> Im not picking on anybody, this is a pretty much standard problem on most
> forums and subjects. Ive even seen flame wars break out when someone dared
> suggest the questioner try Google!
>
> Carl
> KM1H
>
>
> ----- Original Message -----
> From: "Bill W5WVO" <w5wvo@cybermesa.net>
> To: "Alex" <alexeban@gmail.com>; "'Carl'" <km1h@jeremy.mv.com>; "'Herzog'"
> <herzog@frontiernet.net>; "'Ham-amps'" <amps@contesting.com>
> Sent: Thursday, May 28, 2009 11:34 PM
> Subject: Re: [Amps] Silver epoxy yes
>
>
>
>> I don't get it. Why not just Google "silver epoxy"? You get a ton of hits.
>> This stufff is easy to find.
>> Bill W5WVO
>>
>> Alex wrote:
>>
>>> Try the Stepan Company. They used to manufacture a few kinds of
>>> silver epoxy years ago
>>> Alex 4Z5KS
>>>
>>> -----Original Message-----
>>> From: amps-bounces@contesting.com
>>> [mailto:amps-bounces@contesting.com] On Behalf Of Carl
>>> Sent: Thursday, May 28, 2009 2:05 AM
>>> To: Herzog; Ham-amps
>>> Subject: Re: [Amps] Silver epoxy yes
>>>
>>> Silver epoxy is still around. We used it to seal microwave modules
>>> prior to going in the oven were it was cured and the modules then
>>> final tested and shipped.
>>>
>>> Carl
>>> KM1H
>>>
>>>
>>> ----- Original Message -----
>>> From: "Herzog" <herzog@frontiernet.net>
>>> To: "Ham-amps" <amps@contesting.com>
>>> Sent: Wednesday, May 27, 2009 9:16 PM
>>> Subject: [Amps] Silver epoxy yes
>>>
>>>
>>>
>>>> RE: n Wed, May 27, 2009 at 10:44:44AM -0500, Roy wrote:
>>>>
>>>>>> "The piece that broke off fits into a well about 1/2" deep. No iron
>>>>>>
>>>> I have
>>>>
>>>>>> will reach it."
>>>>>>
>>>>>> 73, Dick, W1KSZ
>>>>>>
>>>> =========
>>>> 25 years ago, there was a silver epoxy, that is silver particles in
>>>> the mix. We had a broken capacitor like that, and a brighit tech
>>>> tried "epoxy-ing" it. The thing worked. It had poor clading as
>>>> built, hence the failure. It carried 100 amperes RF at 30 MHz. I
>>>> am still amazed. K2LB
>>>> _______________________________________________
>>>> Amps mailing list
>>>> Amps@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/amps
>>>>
>>> _______________________________________________
>>> Amps mailing list
>>> Amps@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/amps
>>>
>>> _______________________________________________
>>> Amps mailing list
>>> Amps@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/amps
>>>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|