[Top] [All Lists]

[Amps] (no subject)

Subject: [Amps] (no subject)
Date: Sun, 7 Jun 2009 17:28:09 -0700 (PDT)
List-post: <">>
I have a very large transformer that I would like to get rid of. I had it sold 
a couple times only to have the buyer back out at the last moment. I purchased 
it for a 4CX10,000D/8171 amplifier project. I purchased the 4CX10,000D/8171 
tube only to have it arrive damaged. I then purchased this transformer along 
with the tube and socket, only to have this tube and socket arrive damaged 
also. I shelved the project indefinitely.
The transformer weighs roughly 250 pounds. It was originally used in commercial 
equipment with a 4CX5000A/8170 tube which has the same power requirements as 
the 4CX10,000D/8171. It was so heavy, it had to be disassembled into six 
separate boxes for shipping. The seller did not know the voltage rating, but 
this is a very large three phase transformer. I figured I could use a number of 
configurations with just one coil, or two in either series or parallel to get a 
variety of outputs that would be much more than suitable for my needs.
If you are building one of those beefy power supplies, this will surely handle 
the demand. I am willing to take little to nothing if you pick it up in Fair 
Oaks, CA. I will ship it if you want to cover the costs, but this may be 
difficult. Contact me off list if you are interested.
Jim Smith,
Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] (no subject), jimsmitheguard-a <=