ORIGINAL MESSAGE:
On Thu, 18 Jun 2009 05:25:26 -0400, "David J Windisch"
<davidjw@cinci.rr.com> wrote:
>Need 2. Anyone out there with a source, or know of a clever way of making
>substitutes, please?
>
>Tia & 73/dx
>
>Dave, W8FGX
REPLY:
Do you mean a connection to a turn on the tank coil? If so, I use a
piece of thin brass strap, 1/4 inch wide. I form it around a wire or
drill bit which is just a tiny bit smaller in diameter than the tank
wire, then drill a hole through it for a 4-40 nut and bolt. Snap it
onto the tank wire and install the nut and bolt. Works like a charm
and is much more reliable than a soldered connection.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|