Amps
[Top] [All Lists]

Re: [Amps] Power Supply Rectifier Board Cap Replacements

To: "aborg" <a_borg@yahoo.com>, <amps@contesting.com>
Subject: Re: [Amps] Power Supply Rectifier Board Cap Replacements
From: "Carl" <km1h@jeremy.mv.com>
Date: Thu, 6 Aug 2009 16:22:00 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
The 330uF CDE 381LX 105*C series is what I use for all amp recaps. Run cool, 
give better regulation.

Available from Mouser. While at it get a .01@ 3KV discap from there and put 
at the base of the plate choke. The 500pf in there now is a joke and 
electrolytics dont like RF.

Carl
KM1H


----- Original Message ----- 
From: "aborg" <a_borg@yahoo.com>
To: <amps@contesting.com>
Sent: Thursday, August 06, 2009 4:10 PM
Subject: [Amps] Power Supply Rectifier Board Cap Replacements


>
> Are there any technical or theoretical objections to replacing 100uf 500v 
> electrolytic can capacitors with 180uf 450v snap on capacitors in a 
> Dentron MLA-2500 amplifier ?
>
>
> Mike-KK4MS
> a_borg@yahoo.com
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>