jimsmitheguard-a@yahoo.com wrote:
> More often than not, the neutral overlaps momentarily.
>
Momentarily?
Here they have to be solidly connected.
But even if they aren't, at 4 points they are ground. AT the power
pole, at the generator, and directly connected in the panel and sub
panel. IOW the green ground wire to the ground rods connects directly to
the same buss as the neutral.
73
Roger (K8RI)
>
> Jim Smith, EE
> KQ6UV
>
> --- On Tue, 8/11/09, Gudguyham@aol.com <Gudguyham@aol.com> wrote:
>
>
> From: Gudguyham@aol.com <Gudguyham@aol.com>
> Subject: Re: [Amps] TRANSFER SWITCH
> To: magoo@isp.ca, amps@contesting.com
> Date: Tuesday, August 11, 2009, 4:36 AM
>
>
> ANY transfer switch that is UL approved for that use in the USA will
> "break before make". This is no concern here.
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|