Hi Kevin:
Hmmmm...........that does not sound like TenTec! I really suggest that you call
TenTec back and ask for Stan Brock, WD0BGS @ 865-453-71772.
If you cannot get any satisfaction there, have your bud call Cal Fisher @
214-476-5107 or E-mail Cal @ info@hamrepair.com . Cal owns/operates
HamRepair.com in Carrollton, TX. Carrolton is a northern suburb of Dallas,
TX........few hours from Austin.
GL
Val Erwin, W5PUT
Flower Mound, TX (north of Dallas)
--- On Tue, 8/18/09, Kevin LaHaie <klahaie@centricata.com> wrote:
From: Kevin LaHaie <klahaie@centricata.com>
Subject: [Amps] Ten Tec Centaur 411 repair?
To: "Amps@contesting.com" <Amps@contesting.com>
Date: Tuesday, August 18, 2009, 3:10 PM
Hello Group
A friend has a Ten Tec Centaur, model 411 (runs 3 811a) that has a
problem, and Ten Tec apparently can't help! From my conversation with
him, it appears the bias is not functioning, so the amp will not go into
transmit. He has measured the bias voltage, with sits at 14v on standby,
and switches to 5v for transmit, and it is not changing.
He lives in Austin Tx, and I hope someone on the list knows of a
competent repairman somewhat close to the area that would be willing to
troubleshoot and hopefully repair this amp for him.
Any leads for him?
Thanks Kevin K7ZS
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|