[Amps] {Amps] Loaded output circuits 2nd try

To:	Ham-amps <amps@contesting.com>
Subject:	[Amps] {Amps] Loaded output circuits 2nd try
From:	Herzog <herzog@frontiernet.net>
Date:	Mon, 31 Aug 2009 18:23:44 -0400
List-post:	<amps@contesting.com">mailto:amps@contesting.com>

Note the National NCL2000 had a phone/CW switch, whose real action was 
to lower the plate voltage for CW, to keep the efficiency and legality 
in synchronization.
    Yes, i vote as best for correct and understandable.  K2LB
==
RE: Thanks, Gary, for explaining that so eloquently. I think yours is the
most understandable reply. It should make sense to all AMPS listers.
73

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] {Amps] Loaded output circuits 2nd try, Herzog <=

Previous by Date:	[Amps] {Amps] Loaded output circuits, Herzog
Next by Date:	Re: [Amps] SB-220 bias question, jeff millar
Previous by Thread:	[Amps] {Amps] Loaded output circuits, Herzog
Indexes:	[Date] [Thread] [Top] [All Lists]