Amps
[Top] [All Lists]

Re: [Amps] Dimished Tube Life

To: Gary Patterson <gpatterson53@hotmail.com>, <amps@contesting.com>
Subject: Re: [Amps] Dimished Tube Life
From: Dave white <mausoptik@btinternet.com>
Date: Fri, 25 Sep 2009 12:10:06 +0100
List-post: <amps@contesting.com">mailto:amps@contesting.com>
The answer at least made me laugh,

As everyone is now saying, there are a zillion variables in play so it's a bit 
of an impossible question.

What filament voltage? Filament soft start? Ht? Cooling? Stability? 
Manufacturing variances in tube? Manufacturer? New or rebuild? Air temperature? 
Air humidity? Blower runs after you switch off? Do you drive the amp? Bt how 
much? What frequency? How well tuned? Good smoothing capacitors? Well regulated 
filament? Bias? Etc etc

So maybe 4 hours isn't such a flippant answer after all!  Personally if asked 
such a vague question I'd give a vague answer: something between just above 
zero and 'lots'.....

Cheers
Dave G0OIL

-----Original Message-----
From: Gary Patterson <gpatterson53@hotmail.com>
Sent: 25 September 2009 09:11
To: amps@contesting.com
Subject: Re: [Amps] Dimished Tube Life


"What a Crap answer"  ...... What a thoughless response.  Clearly, with the 
data given, as we take the limit of N with respect to tube usage the answer of 
4 converges as the only logical answer.


 
> From: noddy1211@sbcglobal.net
> To: amps@contesting.com
> Date: Thu, 24 Sep 2009 21:20:29 -0700
> Subject: Re: [Amps] Dimished Tube Life
> 
> What a Crap answer, in reality nothing that you could even measure, don't
> even worry about it
> 
> Mike
> 
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of Gary Patterson
> Sent: Thursday, September 24, 2009 8:02 PM
> To: amps@contesting.com
> Subject: Re: [Amps] Dimished Tube Life
> 
> 
> 4 hours
> 
> > From: mhughes149@verizon.net
> > To: amps@contesting.com
> > Date: Thu, 24 Sep 2009 22:43:13 -0400
> > Subject: [Amps] Dimished Tube Life
> > 
> > Hello all !
> > 
> > I wonder, and I hope someone can offer a reasonable explanation. If I turn
> on my AL 1500 Amplifier, which uses the 8877 indirectly heated cathode tube
> when I come into the shack and then 4 hours later, I turn off the amplifier
> and go about my business, how much have I shortened that tubes' life ?
> > 
> > KE9AG
> > 
> > Mike..
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> 
> _________________________________________________________________
> Microsoft brings you a new way to search the web. Try BingT now
> http://www.bing.com?form=MFEHPG&publ=WLHMTAG&crea=TEXT_MFEHPG_Core_tagline_t
> ry bing_1x1
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.409 / Virus Database: 270.13.112/2393 - Release Date: 09/24/09
> 18:00:00
> 
> ___


[The entire original message is not included]
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>