I wonder if transistors don't care because generally they are connected to well
regulated power supplies. My guess is if transisters were subjected to big
spikes in current and voltage similar to tubes at power on state, there would
be a higher number of transistor failures. But that is just a guess.
Paul (KG7HF)
From: Charles Harpole <k4vud@hotmail.com>
Subject: [Amps] amp advice from Alpha
To: <amps@contesting.com>
Message-ID: <COL107-W244DF73D48041F318C127AF7D70@phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"
... Transistors, apparently, don't care.
73
Charles Harpole k4vud@hotmail.com
------------------------------
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
End of Amps Digest, Vol 81, Issue 47
************************************
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|