THE STEP START RELAY IS 120 VAC AND THE CONTACTOR RELAY IS 12 VDC. If you see
it anyway else your not reading a schematic correctly
-----Original Message-----
From: donroden@hiwaay.net
To: amps@contesting.com
Sent: Sat, Oct 24, 2009 11:27 am
Subject: Re: [Amps] AL-1200 Relay Confusion
If the AC impedance is high enough ........
Don WA4NPL
uoting "RICHARD SOLOMON" <w1ksz@q.com>:
> A quick look at the circuit and parts list shows it as a 12 VDC Coil, BUT
the schematic shows the Coil across 110 vac.>
73, Dick, W1KSZ
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
______________________________________________
mps mailing list
mps@contesting.com
ttp://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|