Last stated,
> Remember, the meter is not in the cathode to ground, but from filter caps
> to
> ground.
"Measuring the power supply current you will read the power supply current
through all
tube/s elements. If there is a screen grid and you wish to measure all tube
elements
separately, the screen grid meter pretty much has to be in the screen grid
connection.
To the SG supply or to ground."
The positive terminal of the power supply connects only to the triode tube's
plate. Therefore only plate current can flow in the PSU's negative lead and
meter it seems to me.
Roy, K6XK
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|