Amps
[Top] [All Lists]

[Amps] Stripline design

Subject: [Amps] Stripline design
From: Roger <sub1@rogerhalstead.com>
Date: Sun, 15 Nov 2009 22:04:06 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I'm looking at building a 2-meter amp using a stripline with a pair of 
3-CX800's or 4CX-800's, but I've not found any real data on the design 
(dimensions) of the actual strip line.  Another possibility is building 
the 6 'n 2 amp in the ARRL classic amp design handbook. I also have a 
Henry 2002A using a single 3CX-800 with a strip line.

Unlike using the tube characteristics and designing a standard Pi or 
Pi-L network for a given Q, I've found no information on strip lines in 
any of the hand books.  Yes, there were a couple of amps using one and 
the dimensions were given, but if the design information was there I 
missed it.

The only thing I found on the net were the download sites that appear 
free until you give them your information and then they want you to 
pay.  I'd probably sign up if they told me the charges up front. 

73

Roger (K8RI)
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>